Mechanical flow meters are one of the oldest yet most reliable flow measurement technologies, widely used across oil & gas, chemical, water, and industrial applications. Unlike electronic flow meters that rely on sensors and digital signal processing, mechanical flow meters use physical moving components—gears, rotors, floats, or turbines—to directly measure volumetric flow.
Spis treści
What Are Mechanical Flow Meters?
A mechanical flow meter is a device that measures flow by converting fluid motion into mechanical movement. As fluid moves through the meter, it drives internal mechanical components, and the movement is translated into volumetric flow.
- Proven, durable, and cost-efficient
- No external power required
- Direct volumetric measurement
- Excellent for viscous liquids
Core Principle:
Mechanical meters directly measure przepływ objętościowy by counting physical movement generated by the fluid.
Main Types of Mechanical Flow Meters
Below are the major mechanical flow meter categories—focusing on your requested types with expanded working principles.
Przepływomierze wyporowe (PD)
PD flow meters physically trap a known volume of liquid and release it repeatedly. Each cycle corresponds to a fixed volume, allowing extremely accurate volumetric measurement.
PD meters are the most accurate mechanical flow meters and are ideal for viscous fluids such as oil, lubricants, hydraulic fluid, chemicalsoraz fuel.
Wspólny PD Flow Meter Types
Przepływomierz z przekładnią owalną
Zasada działania
Two interlocking oval gears rotate inside a precisely machined chamber. As fluid flows through, it forces the gears to rotate. Each rotation displaces a fixed, known volume of liquid. A magnetic or mechanical pickup counts gear rotations → converting displacement into flow rate.
Zalety
- Extremely high accuracy (±0.2–0.5%)
- Excellent for płyny o wysokiej lepkości
- Maintains accuracy despite viscosity changes
- Low sensitivity to flow profile or turbulence
- Minimalny spadek ciśnienia
- Simple, robust internal structure
Widely used in oil measurement, lubrication systems, and chemical dosing.
Bi-Rotor / Helical Gear PD Flow Meter
Zasada działania
Two precision-machined helical rotors rotate in opposite directions. As the rotors move, they create sealed cavities that trap fluid and move it axially. Each rotor revolution corresponds to a predictable displaced volume.
Zalety
- High accuracy (±0.1%–0.5%)
- Very low pulsation
- Wide range of viscosities (fuel → heavy oils)
- High pressure capability
- Smooth flow, minimal vibration
- Excellent long-term stability due to no metal-to-metal contact
Gear Flow Meter
Zasada działania
Two spur gears mounted in a tight chamber rotate as the liquid flows through. The volume trapped between the gear teeth and meter body is transported around the outer diameter of the gears—each gear rotation equals a known displacement.
Zalety
- Outstanding low-flow sensitivity
- Ideal for very small flow rates (e.g., MT-GF Low-Flow PD Meter)
- Suitable for thick or thin liquids
- Excellent repeatability
- Compact design
Common in small dosing systems, lubricating oil circuits, and high-precision chemical delivery.
Nutating Disc Flow Meter
The nutating disc is one of the oldest and most widely used PD designs, especially in water metering.
Zasada działania
- A disc mounted on a central ball or pivot “nutates” (wobbles) inside a chamber.
- As fluid flows, the disc’s wobbling motion displaces fixed fluid volumes through separate compartments.
- Each wobble cycle corresponds to a known volume.
- A mechanical linkage or magnet counts the cycles.
In simple terms:
The disc rocks rather than spins, and each rocking cycle displaces a specific amount of fluid.
Zalety
- Very robust & proven technology
- Widely used in municipal water meters
- Niski koszt
- Accurate for clean, low- to medium-viscosity liquids
- Works well in domestic and industrial water distribution
Reciprocating Piston Flow Meter
Widely used in fuel dispensing, chemical batching, and lubrication systems.
Zasada działania
- A piston moves back and forth (reciprocates) inside a cylinder.
- Fluid enters the chamber, pushing the piston in one direction.
- A check valve directs flow during each stroke.
- Every piston stroke displaces a fixed volume.
- Flow is measured by counting the number of strokes.
Zalety
- Very accurate (±0.2–0.5%)
- Excellent for very high-viscosity liquids (grease, wax, tar)
- Self-priming ability
- Can handle very low flow rates
- High resistance to viscosity swings
Rotary Piston Flow Meter
Rotary piston meters are common in oil meters, LPG dispensers, and industrial batching systems.
Zasada działania
- A crescent-shaped piston rotates inside an oval or circular chamber.
- As the piston rotates, it traps and transfers fixed liquid volumes.
- Rotary movement is transmitted to a mechanical register or pulse output.
This design is also called a rotary vane lub rotary lobe piston depending on geometry.
Zalety
- Very high accuracy for oils and fuels
- Strong low-flow performance
- Smooth, continuous displacement
- Works for both thin and thick liquids
- Compact and durable design
Przepływomierze turbinowe
Turbine flow meters are technically mechanical meters because they use a rotating turbine wheel do pomiaru prędkości przepływu.
Zasada działania
- Fluid enters the meter and strikes the turbine blades.
- The turbine rotor begins to spin.
- The rotational speed is proportional to fluid velocity.
- Sensors (magnetic, optical, or mechanical) detect each blade passing.
- Pulse frequency → flow rate
- Integration → total flow
This method works best when flow is clean, steady, and has moderate viscosity.
Zalety
- Wysoka dokładność dla light oils and clean liquids
- Szybki czas reakcji
- Suitable for high flow rates
- Good for fuel, water-like liquids, and clean gases
- Lower cost than Coriolis or PD meters
Variable Area (VA) Flow Meters – Rotameters
A variable area meter (commonly a Rotameter) uses a float inside a tapered vertical tube.
Zasada działania
- The tube widens from bottom to top.
- Flow enters at the bottom, lifting the float.
- Float rises until: upward fluid force = weight of the float
- The float’s height corresponds to a specific flow rate.
- Operators read the flow value from the scale on the tube.
This is a purely mechanical balancing system between gravity and fluid force.
Zalety
- Ideal for low-pressure and moderate-accuracy applications
- Simple & low-cost
- No power required
- Odpowiedni dla ciecze i gazy
- Visual indication, easy to read
Mechanical Flow Meter Mediums
Mechanical meters, especially PD designs, excel in:
High-viscosity liquids
- Hydraulic oil
- Lubrication oils
- Heavy fuel oils (HFO)
- Ropa naftowa
- Resin, grease, syrup
Medium-viscosity liquids
Low-viscosity clean liquids
(Turbine meters perform well here)
- Light fuels
- Clean water
- Rozpuszczalniki
Mechanical Flow Meters vs Digital Flow Meters
Mechanical Flow Meter Advantages
1. No power needed
Ideal for remote or hazardous areas.
2. Best for viscous fluids
PD meters outperform digital meters on oils and high-viscosity media.
3. High accuracy (especially PD meters)
Up to ±0.1% for premium bi-rotor PD designs.
4. Simple, rugged, long-life design
No electronics → fewer failure points.
5. Cost-effective
Much cheaper than Coriolis or ultrasonic technologies.
6. Less installation sensitivity
PD meters don’t require long straight pipe runs.
7. Excellent low-flow measurement (gear & PD designs)
Where Digital Flow Meters Are Better
- Mass flow measurement
- Gas applications
- Corrosive fluids
- Large pipe sizes
- Extreme precision requirements
- Situations requiring remote monitoring & automation
Mechanical flow meters remain indispensable in oil, fuel, lubrication, and industrial liquid measurement due to their reliability, simplicity, and strong performance with viscous fluids. Each technology offers unique strengths across viscosity, accuracy, cost, and installation requirements.
